Archive

Category Archives for "Plasti Dip"

How Many Cans of Plastidip for A Car?

Every vehicle will require a specific amount of Plastidip and this amount varies depending on the size of your vehicle, its current color and the color you would like to dip it. Moreover, Plastidip is not like paint where you spray until the color changes, you NEED thick peel-able layers. You also NEED an even layer to avoid any sort of thick texture.

If properly applied, Plastidip can easily last 3+ years or longer without having to be retouched. It is a very durable and resilient product. The spray technique when applying, as well as the amount of coats applied will heavily determine the longevity of the product. After three years, or during the three years if desired, a new refresher coat can be easily applied.

Plastidip is extremely resistant to the elements, including sun exposure, winter ice, cold, salt etc. A lot of customers actually dip their wheels and cars specifically to protect the original surfaces from the winter season. So if you’re in a country that has really cold winters, you might want to consider plastidipping for protection rather than for fancying your car. Please keep in mind however that Fluorescent and Blaze products are subject to fading after prolonged UV exposure. This only happens with these two items due to the fluorescent pigments utilized.

When considering dipping new or newly repainted cars, test your paint before any Plastidip application. Apply the product to a small inconspicuous area and remove the plastidip after it's dried to ensure the new paint is cured enough to withstand the application and removal process. Testing is always suggested before dipping a repainted or repaired car.

How Many Cans of Plastidip for A Car 1

How Many Cans of Plastidip for A Car 1 (Source: flickr.com)

Gunmetal Grey base coats are recommended for white and light colored vehicles (unless you're Dipping the car White). Gunmetal Grey can also improve the coverage of Yellow, Red, and in general can help extreme color transitions (a darker paint to a light Dip or light paint to a dark Dip).

On top, a minimum of 6+ coats are recommended, not only for durability, but to make sure it peels off in large pieces when you are ready for removal. For the maximum level of gloss, a minimum of 3 finishing coats are recommended over an existing Plastidip base.

On an average, a coupe takes 3 gallons, a sedan takes 4 gallons, a small SUV takes 5 gallons, and a large SUV takes 6 gallons. 11.5 cans make 1 gallon of the dip so you will require 35, 46, 57 and 69 cans respectively.

Best Spray Gun For Plasti Dip

When you are planning to spray Plasti dip, the precision level that you attain will also depend on the type of sprayer you are using and how well you can control it. Currently, there are a numerous sprayers that come for spraying plastidip.

If this is the first time you are using Plastidip spray for your surface, it is advisable that you take some time and find the best sprayer as it is a one-time investment and can make or break your Plastidip finish.

To begin with, there are a few product which are extremely popular and useful and have good reviews. It is always a good idea to check for reviews before you purchase a product.

Here are the top 2 Plastidip sprayers we came across:

#1. DYC DipSprayer™ System

DYC DipSprayer™ System is specially designed to spray rubber coatings. The DIY spray gun can turn upto 360 degrees giving you any angle that you require to spray your vehicle. This allows you to spray with extreme uniformity and reach into areas which are otherwise hard to get into. It is equipped with the DYC Quick Connect Hose which is wrinkle and effect resistant. The DYC DipSprayer is easy to hold onto and gives you a flexibility to use it. The needle of the DYC DipSprayer, also called DipTip, gives a much better finish over the normally used 3500 needle.

It also comes with additional gaskets and needle remover tool. It is the most recommended produxt for spraying Plastidip by a huge pool of Plasti dip users.

The main issue with buying this sprayer is that it is designed so specifically for PlastiDip that the other dips, latex paints e.t.c would not be able to get sprayed on via DYC sprayer so easily. Even if you do use others, it would not give a good finish and smoothness

PROS

  • Can turn upto 360 degrees for complete coverage
  • Easy to use
  • Flexible
  • Better finish with DipTip

CONS

  • Designed only for PlastiDip, hence it is advised to not be used with dips like latent paints

#2. Wagner Double Duty Sprayer

Wagner Spray Tech 0518050 Control Spray Double Duty HVLP Sprayer is an equally popular sprayer for PlastiDip. It keeps out the extra particles from the paint giving a refined paint spray which ultimately gives a smooth finish to your surface. With the Double Duty Sprayer you can control the flow of your paint easily as per your requirement. You can even use the double duty sprayer inside the house. The materials and parts of the double duty sprayer is such that there is maximum control over the spray amount and minimum overspraying. It even comes with three different patterns which are vertical fan, horizontal fan and round. It comes with a unique Lock-n-Go technology which helps you in quick material changes.

For people who have been using a sprayer for the first time have found this product extremely useful and consider it one of the easiest sprayer to handle without complications.

The major issues with this sprayer is the durability as it can get damaged if not taken good care of it and overusing the product.

PROS

  • Refined paint spray without any extra particles
  • Smooth and Glowy finish
  • Maximum control and minimum overspraying
  • Unique Lock-n-Go Technology

CONS

  • Decreased Shelf-life
  • Can be overused easily

Rust Oleum Peel Coat Review

Rust Oleum Peel Coat is a coating which is temporary and pretty much peelable. It is popularly used for coating vehicle parts which includes the wheels, the hood, rims e.t.c. This peel coat is often added as finisher where in it customizes your vehicle parts and surfaces and provides it with a smooth and matte type finish. It is washable and hence, gives the user of this coating much more flexibility with going innovative on customization, (check out the post "how to remove plasti dip" in this blog to have your own comparison between Rust Oleum Peel Coat and Plasti Dip). This type of coating is suitable for surfaces which are metal, plastic or glass. From personal experience and online reviews, the average lifespan and durability of the Rust Oleum coating comes up to a good three months.

The finish of the final coating depends on how well you have used the product. Having said that 7 out of 10 times, Rust Oleum Peel Coat is known to leave a matte and smooth finish without any bubbles or roughness. The rest 3/10 times, the weather condition, cleanliness of the surface, handling the product might lead to a rough coat causing a bad looking finish which does not satisfy the user.

Cleanliness wise, the matter surface of the coating is known to attract dust and other dirt easily. It can be difficult to clean because if you scrub a little too hard, there is a chance that the peel coat might just peel off easily. So cleanliness and maintenance can be an issue. The good thing about this is that the Rust Oleum Peel Coat covers a large area in just one can and you will not have to hesitate redoing the whole coating, if you are willing to. One can of the Rust Oleum Peel Coat cab cover up to four wheels if used properly without wastage.

Peeling the coating is one of the easiest steps. It comes out easy and does not require a lot of efforts in comparison to other coatings like Flexi Dip and Plasti Dip. The product’s USP is its temporary usage giving the users more opportunity to use different styles and customizations.

The Rust Oleum Peel gives a lot of options in colors, which are a lot more than what are available for other coatings. It offers about 15 colors to choose from. Once you apply the peel coat, even the rough surfaces smooth out. There may be cases where if there is a drip on the surface, it would be noticeable unless you apply a few more coats. If you are trying to cover some spots, you would require more coats of the Rust Oleum Peel Coat as it is quite thin and in order to have a thick cover, more coatings are required. People use the thin characteristic of this coating to add effects to the surfaces like stripes and shapes from this on top of the normal coating that they have. Since it is easy to peel off, if the design goes wrong, it can be easily peeled off.

How to get rid of orange peel?

Orange peel in simple words is an error while doing a paint job. It makes your surface look like that of an orange peel. It usually appears on the surface which has been repainted. Orange Peel may happen due to improper use of paint, thinner or painting technique. It deprives you getting that flat shine on your vehicle or other surfaces. In this special post, I will provide the steps-by-steps how to get rid of orange peel?

Required Materials

The materials you will need to clean orange peel from the surface: Sand paper (500 grit and 2000 grit), Tape, Water, Rubbing compound, Polishing compound, Spray Wax, terry cloth bonnet and glaze (If required)

Orange Peel Removal Process

  1. Before you begin, ensure that all the areas around the surface which do not require orange peel removal are taped off as during the sanding process you do not want to get rid of paint from those areas as well.
  2. Start off by wetting the surface and using 1500 grit sandpaper all over it till you get a matte like finish of the surface. In case there are areas which cannot be done with the sandpaper, use a 2000 grit and get rid of the coating in hard corners as well. While doing this, ensure that you do not it so hard that the underneath paint comes off because it will require a full paint job. We just want to get rid of the top coating in the wet sand process.
  3. Once this is done, you will need to wipe off the surface. Also it is advisable to change the tape from the areas with a fresh layer as most of it might have become worn out during the sanding process and you do not want to get the coating on top of them.
  4. Now, put the rubbing compound on the Terry cloth bonnet and start rubbing on the surface. You need to rub the compound nice and evenly in quick motions throughout the surface in order to get a shiny and even finish. Once that is done, leave it for a good 5-10 minutes.
  5. After the rubbing compound is all set, use a spray wax. You need only a few sprays and then you can rub it with the terry cloth bonnet or even with a plain clean piece of cloth.
  6. It is now time to spray on the polish. Use the polish in the Terry cloth bonnet and rub it quickly spreading it out evenly. Keep rubbing in the same motion till you get a perfect shine and finish. After this is done, you can choose to apply glaze over the surface. For this, you need to simply spread the glaze with your hands. The glaze serves dual purpose, gives your surface a little extra shine and in addition to that, protects your layer of polish from extreme weather conditions.

Pull of the taped areas. Your surface should be ready to go. In case you still see some orange peel, you can choose to repeat the procedure again and get a complete flat shine to your surface. Or you can use other way to paint your car, for example to use best plasti dip to dip your car, this way is more flexible and easy to remove when needed!

How Long Plasti Dip Lasts?

Plasti Dip is a flexible and rubberized coating on tire rims and other surfaces to protect it from corrosion. It is usually used for tires, grills, tools etc.

The way to making Plasti Dip keep going for no less than 3 years without the requirement for modifying is to ensure it's connected legitimately in any case. Plasti Dip is exceptionally strong and won't lose its bond, however two things will help decide to what extent it, truth be told, can last. The first is the separation you hold the can from the surface as you splash. The second is the quantity of coats you apply at first time.

Plasti Dip can oppose up to 200°F, and has been known to deal with the warmth and manhandle delivered at hustling or rally auto occasions. So, how long would the plasti dip last on wheels does not really depend on the temperature that you are in. In any case, warm resistance truly relies on upon to what extent Plasti Dip is presented to that warmth, and how you anticipate that the covering will perform in that warmth. By and large, if the covering won't be liable to impacts, nor is it anticipated that would oppose scraped area or chemicals, and if it's only for a short measure of time, most Plasti Dip surfaces would have the capacity to deal with temperatures outside the recorded range.

When you need it to, Plasti Dip really peels off. Be that as it may, one reason Plasti Dip may be difficult to expel is whether it was connected in too thin a coat. On the off chance that the layer of Plasti Dip is too thin, it will attack a few pieces as you attempt to peel it off, making evacuation a genuine migraine. To make expelling Plasti Dip simpler, include another coat (4 to 5 coats altogether would be extremely useful), in light of the fact that Plasti Dip sticks best to itself! That additional quality of an extra layer gives you a chance to peel everything off in one

Regardless of whether it's the hot sun thrashing its UV beams on your Plasti Dipped surface, or the steady battering by ice, rain or rough street salt, Plasti Dip opposes them all. This would clarify why numerous clients dip their auto wheels into Plasti Dip before winter has an opportunity to attack your vehicle’s metal.

In conclusion, if you need to know how long plasti dip lasts, it really depends on how well you applied the coatings and also on how well you preserved it. Retouching always helps and make it stay for an even longer span and can save you the hassle of peeling off the whole thing and applying again. The next time you plan to apply the coating, try taking your time ad ask for help if needed to get that perfect coat. Also, it will make your surfaces even more smooth and give a good look in addition to the protection.

Best way to remove Plasti Dip

Plasti Dip removal is a difficult process if you have sprayed a lot of layers of Plasti Dip coating in your vehicle or any other surface. When it comes to removing them, it might not be as easy as just peeling it off in one shot. If you have just put a layer or two, there are chances that the layer might just peel off quickly, but again, if there are tough corners, the process can get difficult. Read more detail about plasti dip glossifier review on this autoizipro.com!

There are many Plasti dip removers you can use in order to get rid of the Plasti Dip coating. The best ones as per reviews are Goo Gone, WD-40 and Aircraft Paint Remover. Irrespective of what cleaner or chemical you are using, there is a certain way you can follow in order to remove Plasti Dip easy and quick.

Best way to remove Plasti Dip

Best way to remove Plasti Dip

First of all, try to keep the object in a place where you are comfortable with the dip peeling off so it does not damage your property. Next, gather the materials that you will require for this process which are a plastic razor, a micro-fibre towel (or even a normal one), Plasti dip remover, gloves (advisable).

Once you have gathered the materials required, spray the remover over the Plasti Dip coating and let it rest for 2-3 minutes. Once that is done, spray one more coat of the remover and again let it rest for 2-3 minutes. This is to make the dip come off easily. Try scraping the dip off from the surface. You should be able to get most of it off depending on the thickness of the coating. After you are done scraping whatever you could, spray more Plasti dip remover on the remaining areas and let it rest. You can spray a thicker coat for a thicker Plasti dip coating. It might be difficult to get rid of the Plasti dip coating around the corners if it is a thick layer. You need to repeat the spraying and scraping till you get rid of the entire coating. Try peeling off as much coating as you can to save your energy and scrape in places which are rigid.

Once you are done scraping the entire Plasti dip coating off, wipe the surface. Before you finish off, spray the remover over the entire surface once more and let it rest for a few minutes. Wipe it clean. If the surface is something where you have contact with your skin on a regular basis, use a detergent to wash off the remover as it has chemicals which might cause a reaction to your skin. Always ensure that the Plasti dip remover is not in contact with children and try to wash off the chemicals during cleaning of the area where you removed the coating.

This is the easiest way to remove Plasti dip and proven to be the best. The trick here is to spray, rest and scrape the coating till you get the desired results

Plasti Dip Glossifier Review

Plasti Dip Glossifier is addition to Plasti Dip to give it a glossy finish instead of the matte finish. It is applied over the surface of plasti dip coating. If you do not like the matte finish of your plasti dip coating, this turns out to be pretty good option over those expensive powder coatings and can be retouched every time you feel it is losing its shine. It is also an easy to use and simple way to getting your tires that glossy look which is usually achieved after you get them coated freshly. It is more like an add on to your original plasti dip coating.

Plasti dip glossifiers has gathered positive and negative reviews. From what we have gathered, there are good and bad things about it depending on how you use it and how to remove plasti dip.

Plasti Dip Glossifier Review

Plasti Dip Glossifier Review

Plasti Dip Glossifier Reviews

If your Plasti Dip coating is good and smooth, there is a good chance that the plasti dip glossifier will have a good grip on the surface just after 2-3 layers are enough to give you a glossy finish. Having said that, it depends on how you apply the coat. A uniform coating is hard to achieve in the first time and if you keep putting coatings one after the other, it becomes even more non-uniform. The first time you apply Plasti Dip Glossifier, it is difficult to handle the coating. It is usually seen that people end up adding multiple layers of coat and end up getting a thick layer of unfinished glossifier.

Plasti Dip Glossifier Review

Plasti Dip Glossifier Review

The real problem arises when you have to remove the layer of gloss because of its unfinished surface. If you have freshly applied the glossy paint, it might still be easier to remove it by wiping it off. In case it dries and then you decide to peel it off, most of the times, it so happens that the plasti dip layer also gets knocked off and it becomes impossible to remove the layer. If you do not want to ruin the plasti dip layer, always remove the plasti dip glossifier only when it is wet.

Coming back to application of the plasti dip glossifier, apply a few thick layers for it to stay on for a longer time. Usually the thin coats might peel off when you give your tires a rough car wash and you might have to retouch the layer here and there every once a while. To avoid that, apply 2-3 thick layers of plasti dip glossifier over the top and let it rest untouched.

As mentioned above, the look and feel of the plasti dip glossifier depends heavily on your coating. We know people who gave awful reviews to the plasti dip glossifier but on further inspection, it was clear that it was due to their rough and coarse layer of plasti dip coating beneath. Since Plasti Dip coating can be tough to apply evenly, plasti dip glossifier adds a good effect to it. However, if you cannot spray it well, always ask for help to achieve a clean glossy look.

Top benefits when apply plasti dip glossifier

#1. The plasti dip glossifier leaves a smooth and nice texture after drying.

The glossy finish can be used in contrast to your color of the plasti dip coating to help you achieve the original color and finish that you wanted. A can of plasti dip glossifier costs between $8 to $10. The more coats you apply evenly, the glossier it gets due to high coverage and intensity. It is a cheaper alternative to powder coating and thus, widely popular.

#2. The plasti dip glossifier not only looks good but also has a few uses and benefits.

The most important one of them is that it resists moisture. It means that the coating does not withered and your tires remains safe and free from corrosion even in a humid environment, rains and any exposure to water. One of the lesser known benefits of the plasti dip glossifier is that it protects against electrical shocks. As shocking as that sounds, it is true. Since it is a rubberized layer, it acts as an insulator for electricity and protects your vehicle and you from any kind of electrical damage.

#3. Plasti dip glossifier such as it resists acids and alkalis

It is Anti-Skid and Anti-Slip. It means that you can have a decent drive in water prone areas without the fear of your tire screeching and slipping and protects your precious tires from being a mess. It is also abrasion resistant which will help protect your tires for a longer span. It is also known to be durable and not crack even under extreme conditions of heat and humidity.

Top best plasti dip glossifiers​

Performix 11209 Plasti Dip Clear Multi-Purpose Rubber Coating.

Bundle - 7 Pieces - Plasti Dip Gloss Wheel Kit - Black

Plasti Dip - Rubber Dip Spray - Gallon - Glossifier

Plasti Dip Glossifier Review
Plasti Dip Glossifier Review
Plasti Dip Glossifier Review

The application and maintenance will determine how beneficial the plasti dip glossifier is to you. Always refer to expert guidance online or offline while applying it to get desired results

Flexidip Vs Plasti Dip: Which is Better?

When you are planning to coat your car with an extra layer of these easy coat materials, you can get confused whether to buy Plasti dip or Flexi Dip. Although both are similar in nature, they are quite different from each other. They are both equally good at protecting the surface from corrosion as well.

There are some differences between the two. A few people prefer one over the other due to the difference in the kind of utility they are looking for. To help you find out the best plasti dip for your car, We have come up with the best differences between the two so you can pick up the best option for your need.

1. Pricing

For some people, having a budgeted coating is a priority. Plasti Dip is slightly on the expensive end as compared to the flexi dip, Plasti Dip cans may cost approximately up to $20 while Flexi Dip can be bought in $10 as well. This makes Flexi Dip a cheaper alternative to Plasti Dip.

2. Coating Thickness

From the most popular reviews of both the dips, it becomes clear that Plasti Dip provides for a thicker coating. It has been seen that the coating of Flexi Dip can be thinner than the plasti Dip. Depending on the type of coating you are looking at, both of them have their advantages. For surfaces where you cannot put a thick coating, flexi Dip serves to be the best option and surfaces which are prone to corrosion and require a thick coating, it is probably a better idea to go for Plasti Dip.

3. Smoothness

It is often argued that one Dip is more smoother than the other. While it may be true but it is usually dependant on the fact of how you apply the coating. Even the best coating can look rough if you do not apply it properly and the bad coatings might look good if done well. So this difference which is often considered in favor of the one, holds no relevance as such. From what we have researched and seen, there are almost close to equal reviews of Plati Dip and Flexi Dip being better between the two for smoothness.

4. Consistency

The consistency of Plasti Dip is generally considered to be better than Flexi Dip. All the packs of Plasti Dip have the same consistency throughout and in some reviews from Flexi Dip which shows that Flexi Dip was not consistent throughout. Again, it depends on how you used the item. It is always advisable to shake the can of paint for a good time before you start using it to ensure that everything is properly mixed and consistent. It is also a good idea to keep shaking the can and mixing it at regular intervals while using it to ensure a uniform texture throughout the coating surface.

5. Color

Plasti Dip and Flexi Dip both have common colors but Flexi Dip has a few more options like Pink and Orange which are not available in Plasti Dip. Not only that, Flexi Dip provides options in Black as well called Matte Black and Granite. For color variety, you can always choose Flexi Dip. Also, Plasti Dip provides you with three options in the color Blue which is a very popular choice for most of the coatings while Flexi Dip has very few shades and color options in blue.

6. Uniformity in application

Flexi Dip evens itself out while painting it while Plasti Dip requires more focus and work. Flexi Dip can be easily be painted uniformly while Plasti Dip requires more efforts. So if you want to do less work and achieve an evenly smooth surface, you can opt for Flexi Dip.

7. Coverage

Since Plasti Dip is thicker, it leads to a higher coverage with less paint while Flexi Dip requires more coats to cover the surface properly to an extent where the surface is completely protected of the external environment.

8. Removal of the Dips

Plasti Dip allows for a thicker surface and is slightly easier to remove than Flexi Dip. Due to the thickness, the paint comes out easily while Flexi Dip which is thinner, sticks to the surface tightly making it slightly more difficult to remove it off. Having said that, even Plasti Dip takes a lot of efforts to remove. Only if it is applied in a uniform coat, it can be peeled off easily. Even If Flexi Dip is applied in a one coat layer, it can be easily peeled off. Check out "How to remove plasti dip?" post on this blog.

Both Flexi Dip and Plasti Dip have proven to be good quality rubberised coatings with characteristics of their own. It all depends on what you are trying to achieve with the coating and what you are exactly looking for which will help you in choosing the best coating coating for you use.

3

How To Remove Plasti Dip

Plasti Dip is a type of special rubber coating which is peelable, insulating and durable. It is an air-dry coating which is flexible and non-slip. The most popular use of Plasti Dip is to apply them on the rim of wheels of cars to avoid corrosion. Check my Plasti Dip glossifier review on my blog.

While applying Plasti dip, one usually ends up spraying or brushing a lot of layers to get the desired color and texture. The first and foremost part of knowing how to remove plasti dip is to check the thickness of the plasti dip. Depending on how thick or thin the layer is, you can start the process of removing it. To know how to remove plasti dip coating, you will need to be geared up as older coatings might take a while to come off.

Let us see a step by step way of getting rid of plasti dip from your rims or any other places where you might have applied it.

Step 1: Gathering the right materials

Every work becomes ten times easier if you have all the materials right next to you before you start with the work. Since removing plasti dip can take a while, it is always a good idea to gather all the materials required to get rid of the plasti dip. The main things that you will require are paper towels, a plastic razor, a plasti dip remover, scrap pieces of clothes and gloves are advisory as you do not want the plasti dip remover to be directly be in contact of your skin as it can be oily and greasy and gloves make your life a whole lot easier.

Selecting a plasti dip remover is itself an important part in the whole process. To know the best way of how to remove plasti dip, you can read reviews of the products before actually ordering them. As per recent reviews, it was found that Goo Gone, WD40, DipYouCar Dip Dissolver, De-Solv-It remover are among the highest rated and chosen products for plasti dip removal.

Also, it is preferred to use a microfiber towel for drying off as they dry off quicker. Once you have gathered all the stuff that you will need, it is time to start the next step.

Step 2: Removing the object and put it out in an open area

The object that you want to get the plasti dip rid of, make sure you do it in the open because you might create a mess while doing so. If it is tire of the car, make sure you remove it as it makes your work easier and no plasti dip remover falls on the car. It is always advisable to do in on concrete floors and not on carpets as you do not want to do the extra cleaning work later on. In case you want to know how to remove old plasti from the tires, removing the tires gives you a good grip and helps you while you rub off the plasti dip coating from it and gives you less hassle.

Step 3: Spray the plasti dip removal solution

To begin with, spray the plasti dip on the surface. The areas where you can see heavy coating or a thick layer of coating, apply a lot of solution there so it can help ease the plasti dip and lead to an easy removal. Once you have spray in the desired areas, put on your gloves and rub the solution mildly to ensure it is evenly spread out to the whole surface. Let the solution sit on the surface and settle for a bit. It is a good idea to leave it for a good 5 minutes or so. You can also use a paper napkin to spread out the solution to make it more even. Leaving on the solution helps in easy removal of the plasti dip.

How-To-Remove-Plasti-Dip-3

How-To-Remove-Plasti-Dip-3

Step 4: Scrape the plasti dip

Now is the time for the real task. This is the trickiest part in knowing how to remove plasti dip. While some plasti dip peels off after the solution sets in, the ones with more coating requires a lot of scraping. After you have let the solution set, start scraping the plasti dip using a plastic razor or a towel. Scrape it till you can see the original surface. The easy way to do it is to scrape from the corners so there is a chance you might be able to peel some plasti dip easily. Smaller areas are hard to scrape so always start off with them because you have the most energy in the start. Do it slowly and steadily as you do not want to use up all your energy and feel lazy later. You do not need to use a lot of force as it might damage the item. Use moderate force and scrape uniformly. If you feel some areas are tough, apply more removal solution and scrub.

How to remove plasti dip from rims

How to remove plasti dip from rims

Step 5: Cleaning the item

After you have scraped off the whole plasti dip from the surface. Use a solution of soap and water and wash the surface gently ensuring that you do not let the soap run into unwanted areas. You can use a towel and dip in it the solution and wipe it on the surface to avoid any risk. Once that is done, wipe it off with clean water and pat the surface dry.

This is how to take off plasti dip from the surfaces. The trick is really simple, use less force and more uniformity and patience. An extra hand is always advisable if you are taking off plasti dip from large surfaces. The easiness of the removal mainly depends on the kind of plasti dip removal solution you are using. Ask around for better reviews and buy the best product to save time and energy. Plasti dip is an extremely useful coating and you can always chose to redo a whole coating and to know how to remove the plasti dip, you just need to follow simple steps.